# For the record--we'll be experimenting with this **URL:** \ **Category:** Research and Development\ **Created:** [June 4, 2006, 7:00pm UTC](https://forum.orgones.co.uk/t/for-the-record-well-be-experimenting-with-this/755 "2006-06-04T19:00:00Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Don\_Croft](https://forum.orgones.co.uk/user_avatar/forum.orgones.co.uk/don_croft/32/124_2.png) [@Don\_Croft](https://forum.orgones.co.uk/u/Don_Croft)\ **Post date:** [June 4, 2006, 7:00pm UTC](https://forum.orgones.co.uk/t/for-the-record-well-be-experimenting-with-this/755/1 "2006-06-04T19:00:00Z")
Dear Don, ``` As I understand, You like to read wide expanded texts. Let it be. ``` IT is on it’s way towards You. There are two devices, without any box, only small printed circuit boards. We have no manufacturing possibilities, because all my zappers and other hand-made devices were installed in incidental boxes. I think, it will be no problem for You to find something similar to plastic case. OK? Both pieces has blue (GND) and red (+) input wires, and black (GND) and white (hot) output wires. And now closer to its properties. ``` The first, marked ZapRand, is fully completed Dr.Clark-type zapper, only ``` with my modifications – current-source output (with internal 40V supply), and pseudo- random sequencer-type pulse generator. Output current is adjustable in limits from about 0.1mA or less to about 3mA max, by potentiometer (witch contains power switch, too). Output current is little dependent of patient’s resistance and skin conditions, – it means, that output voltage changes with load resistance to maintain the current. Randomness (chaos) is made by digital shift register with clock generator. Pseudo- means, that one full working period (in our case, 17-stage register gives it: 2exp17-1=131,071 clock pulses) randomness is true, then it simple repeats. Clock frequency was chosen about 4kHz, it gives frequency band spectrum density nearly linear from about ~teen Hz, till clock frequency, then harmonics gradually falling up to several tens of kHz. ``` In mid 70's our medical scientist group started to research effects of ``` weak magnetic pulses on bone fractures and injuries. Pulse fields of 1mT and frequency 80Hz, later 30 and 16Hz For laying patients treatening was made non-stop. First days effect was remarkable, then slows. Changing the frequency restored process. Then came idea to make randomly changing frequency. Effect was beautiful – treatening time shortened by 25-30%. In 80’s was started mass production of little device named “Pulsar”. It was made several hundred thousands, in about two years. Then came crushing of Soviets… I was done registered invention. Random-zapper is powered from 6V source ( 4 pcs AA type batteries), consumption at full load is 10-12 mA. Alkaline batteries lasts very long. Circuit is made to be maximal economic. It is not recomended to go behind 7.5V, but until 4V it maintains all properties. About 4V lightens the small red LED, it signs battery is dying quickly. Blinking yellow LED only indicates “ON”. For me it will be marginaly interesting to compare it with ordinary (without orgonite) zapper. I think, current source output is only convenience, without healing properties, but randomness is essential. Further, it will be marginally interesting to test it with Your options. If I understand, the output current is fed via Moebius coil? Please, be careful to put powerful neodymium magnet near zapper’s choke to avoid saturation of it’s ferrite core and destroying converter. Wishing success! ``` The second device PolyR was made for accoustic waves generator, with ``` piezo-electric membrane, to treaten painful places. I think, it will be ideal for investigating the white-noise principle in Your SP and PW. It contains the same random-pulse generator, only its clock was made about 5 times lower (about 800Hz), and the band’s lowest frequency, respectively. If You find necessary to more lower the clock, You can solder on or beside frequency-determining capacitor (470 pF), marked with white dot, an extra 470 or 330 pF. The device has a bridged output, it means, 2 outputs in antiphase, such doubling output voltage. You needn’t the second output (very short white wire beween transistors), only black-and-white wires. ``` IMPORTANT! It needs to solder a buffer resistor in series with output ``` wire, (maybe a LED, too, to see what happens), because of very low coil’s resistance. If it is 1 kOhm, current will be: voltage minus appr.1.5, in miliamps. Device allows powering from 5 to 16V. Current can be changed, changing the resistor. Maybe Wand obtains extra power! Waiting may be 1.5-2 weeks. Letter now, I see, is too long! About our Latvia I’ll say several words next time. Don, please, look-in the site [http://www.firethegrid.com](http://www.firethegrid.com) . Maybe is it worth to join her? Have a happiness in Your life! Karl. ---
**Author:** ![PeterSpotts](https://forum.orgones.co.uk/letter_avatar_proxy/v4/letter/p/f4b2a3/32.png) [@PeterSpotts](https://forum.orgones.co.uk/u/PeterSpotts)\ **Post date:** [June 4, 2006, 7:00pm UTC](https://forum.orgones.co.uk/t/for-the-record-well-be-experimenting-with-this/755/2 "2006-06-04T19:00:09Z")
That is pretty interesting! Do you know if the wave is still a square wave, or pulse wave–and if so, do you know how close to an “ideal” aquare or pulse wave it is? ~Peter