Aneutronic (Hot) Fusion Research and Geopolitics

Greetings,

Last night I read a fascinating post by Gordon Duff at: [http://www.veteranstoday.com/2012/04/05]

Interestingly, a portion of the above link features, and is consistent with, the Research and Findings of Joseph P. Farrell, as regards advanced technologies of the Nazi/Vrial/SS.

In any case, one of the fundamental themes of the article is to make a case for the REAL reasons for the Miscreant Elite’s attempt to derail the Iranian Nuclear Program through war, and generally destroy their industrial capacity. The above linked article (rather convincingly) proposes that the drums of war against Iran are being beaten to interdict the development, by Iran (a Country without an Elite Controlled Central Bank, same as Syria, same as used to be the case for Libya, etc…) of Aneutronic Hydrogen/Boron (hot) fusion, that can yield practically unlimited electrical power, at a very small fraction of the costs of existing technologies, with no meaningful (less than 1% and easily shielded) Neutron Emissions. It has already been admitted by Panetta, the CJCS Dempsey, and the CIA, that Iran has no Nuclear Weapon capability, nor any capability of internally developing the technologies to create such within any reasonable period of time. Within the above article is additional evidence of the incompetence of quoted government experts and a real expert asserting that the Iranians are at least 10 years (should they start now) in the development of Nuclear Weapons.

Therefore, why the big push to “crush” their nuclear program other than for other, unspecified (Secret), rationale?

Regarding this “new” Aneutronic power generation technology, granted, the DOR output of such a power plant may still be very high (though likely a LOT less than the typical Deuterium/Tritium, Neutron emission rich, output of the “Publicly Approved for discussion” Fusion Reactor Research (Tokamak Reactors) projects, or existing Fission Reactors. However, once the effects of Orgonite, to transform DOR into POR are known/disclosed such problems will almost certainly be resolved to everyone’s satisfaction. It would be interesting to Gift their facility to see if there is any issue with their yielding results, despite a bunch of Orgonite surrounding their New Jersey facility. My gut feeling is that the Orgonite’s effect would not impeded their power generation capabilities….

In any case, as per the article, the only two countries that have been engaged in this research on Aneutronic Fusion Reactions are the US and Iran. I am certain that the Banksters would do practically anything (within their power) to prevent Iran from becoming the vector by which practically unlimited, very cheap, and clean, electrical power can be provided for the planet as such would utterly destroy their “Artificial Scarcity” lever of control as regards energy production (which is the key to everything as the price of manufacturing anything would then drop “to the floor” if energy were abundant, clean, and very cheap).

Regardless, the Article asserts that this technology, and many other related (and weaponized) technologies have been available to the “Dark Cabal’s” Secret Government since at least the 1990’s as a function of breakthrough’s made during the SDI (Strategic Defense Initiative) and kept secret. In fact, related technology breakthroughs are likely to have accounted for the instant vaporization of thousands of tons of steel at the Twin Towers on 911, as Aneutronic Micro Fusion Explosives are alleged to have been in our “Secret” inventory for at least a decade….

What is fascinating, to me, is the apparent loss of control, by the Miscreant Cabal, as we move forward now through this escalating period of global financial turbulence, the liberating influence of the “Internet Reformation” (term coined at thedailybell.com), and the general awakening (Great Cycle of the Kosmos as per Mayan Calendar and other Ancient Indicators) of the populace. It is as if the “body” of the Elite Cabal is being invaded by a progressive “Cancer” of liberating information and where their “immune” system, and defenses, are being increasingly overrun by the “pathogens” (from their perspective) of invasive liberating Memes (dissolving their own) and the inexorable spreading of liberating technologies. Their efforts to squash these “green shoots” of technology are failing, and their body of oppressive control is doomed, despite their frantic efforts, to descend into a putrid, decaying, corpse.

Following are two additional links.

The first is an appeal, from 2002, by noted Plasma Physics Researcher, Eric J. Lerner, who’s project in building a “Plasma Focus Reactor” (I.E. an Aneutronic Fusion Reactions using Hydrogen/Boron) yielded extraordinarily positive results; yet, whose funding (Government and Government related Academia) was immediately canceled, he and his research partners threatened and professionally attacked, and his program shut down. His appeal is one for the establishment of a movement to support this research, and towards finding private funding to carry on the development of this revolutionary technology.

http://bit.ly/HyuGw1

The next is a current link to Lerner’s Company, now a phenomenally successful (as regards the achievements and pace of their research and development) Startup, “Lawrenceville Plasma Physics, Inc.”, that is already quite well into the path of developing a viable, commercial, Aneutronic Fusion Reactor product Offering:

http://bit.ly/HngjAa

It looks to me as if this effort is too far along to stop. Especially with the blossoming of the publicity that this technology, and Lerner’s Project in particular, is beginning to receive as a byproduct of the Internet Reformation’s capacity to CUT through the Mainstream Media’s Censorship.

The great promise of this technology, is in that a typical implementation of this Plasma Focus Reactors would yield a Power plant capable of 20 Meg watts at a cost of approximately $500,000 USD. This is a 20 fold increase in power production, for one half the purchase cost (approximate) for the upcoming LENR technology in development by Rocci in Italy. Such is well within the capacities of a Municipality or large Town and would provide for all of the Electrical Power needs of the Community for a very small fraction of the costs for current power generation technologies and even proposed new ones (I.E. Rocci’s LENR). The resultant economic effects would be staggering growth of industry, manufacturing, decentralization of power generation, and high standards of living for ALL….

As well as cheap and safe space travel propulsion

Regards,

–Azti

The only issue with still using the power grid which is why I think local, smaller free energy reactors or other such generators would be much better is that with local power, now you can get completely away from that nasty AC with its 60Hz frequency chosen to perhaps harm us.

The downside of a DC based power grid even back from the days of the tug of war between Tesla and Thomas Edison is that because of resistive losses through transmission wire, you quickly get to a point where its excessive and then you have to put in another generator station. In Edison’s era, that would have been on a spacing in a crowded area of maybe one per mile which gets VERY expensive.

If you now have something the size of a toaster sitting on the floor below your electric service entry panel that simply feeds the main breaker, DC is now the better choice because at worst you’re going maybe 60-100 feet in wire and the wiring can easily handle all the current the home needs. I’d think that for high power appliances like electric hot water heaters, electric clothes dryers, electric kitchen ranges and the like, the better choice would to simply build a VERY local DC free energy generator into the appliances.

This of course would require a paradigm shift where appliances were now being built to use DC but with the advent of cheap or free local power the government can’t tell you not to use, businesses would pop up to supply the demand.

We all need to get off the power grid so big energy goes away and we need to get away from 50Hz or 60Hz AC power.

Also, that Lawrenceville research place you mention is maybe half an hour from my home by car. The weird thing is, when I looked for the place, it came up with google street view as being a small public storage facility though the street view was from back in 2009. I double checked with a few other map sites and yup, where google says it is, is where they all do so go figure! This whole area is a bunch of small, aging businesses very close together – not the kind of place I’d expect a high-energy physics lab to exist. I’ll know once I get over there to see what is going on.

There actually is quite an industry in DC Appliances. Here is one site:
http://store.sundancesolar.com/12vdcap.html

Also, I recall having read a couple of years ago that Long Distance, High Voltage, DC Transmission lines had significant advantages to AC.
[http://www.brighthub.com/engineering/el]

[https://en.wikipedia.org/wiki/HVDC]

There would not then be any issues with Phase imbalance and a host of other destabilizing, and health affecting, problems with long distance AC Power lines. I believe the problem with DC Transmission is in the number of “Off ramps” required for the current Grid. However, with these small Aneutronic Reactors Towns, “Burroughs” of large Cities, and Municipalities, could negotiate Bilateral Agreements with Adjacent Communities and create a Meshwork of point to point, high voltage, DC transmission lines between themselves for Power Sharing and Backup. The power within the local community would still need to be AC (maybe find a better frequency than 60 cycles… Aircraft use 400 Cycles). With such a system there would be no need to run segments extending hundreds of miles what would result is a Decentralized “Meshwork” of Power Nodes, connected to each other by segment of 5 to 10 miles, or so, of point to point DC transmission lines.

Obviously, the ideal is an even more decentralized power capability where home generation units would obviate the need for AC completely. Maybe there is a way to, in time, make these units small enough. Though it looks like a daunting task due to materials constraints in Electrode Design ( http://focusfusion.org/index.php/site/a … ode_design http://focusfusion.org/index.php/site/a … ign_update ). The current size has a “Burner” the size of a Coffee can and I don’t believe that with the current Materials Science capabilities we can get much smaller.

Maybe the Key is the balanced use of the upcoming LENR (Low Energy Nuclear Reactions, I.E. cold fusion) devices ( http://ecat.com/ ) for Rural and Suburban homes and light industry, and within Urban areas, or in Industrial Applications at Large Factories, etc., the use of these DPF (Dense Plasma Focus) devices would be ideal. It might even be possible to do away with AC power then, even in Urban Areas, as in Large Buildings (Condos/Apartments, High Rise Towers, Eventually in Arcologies) the distances involved might not preclude the use of DC power everywhere (especially if the power was so cheap to generate that the issues of Lag Loss, in DC Circuits, were trivial from an economic perspective).

In any case, I believe the “Genie” is out of the Bottle now and the Miscreant Elite’s control is inexorably slipping away….

There are other ways to generate huge amounts of power without the use of fusion. Henry Moray had a 50KW generator based on an ionic principle that wasn’t much bigger than a TV. Not that there are any design notes as this was a one-up that got destroyed but this technique works. He always said that the trick was the ions. It does make sense to me. To tap the ether (energy sea the universe floats in) you need what is referred to as a scalar interferometer. Tesla used a static high voltage to do this. Stress and you move the reference point far enough away from zero that fluctuations in the field couple through the stress to give you power. Moray used ions produced in vacuum tubes where the grid contained tiny amounts of radioactive materials. There are other ways.

If you can figure out how to tap energy from this “sea” and then convert it into a form useful in 3d space, there are no limits.

People who live near very stressed fault lines (tectonic plates) observe this energy coupling into 3d space all the time. Funny lights in the sky and similar effects are all “bleed through” from the ether into 3d space caused by the stress between the plates which in essence is a scalar interferometer.

The big problem with DC transmission is the resistive loss of copper wire. For DC, this loss is real and is in direct relationship to the amount of current running through the wire. Higher voltages mean less current for a given amount of power transmission (watts) but the secondary problem is that you can’t convert DC to other voltages because DC won’t drive transformers. OK, there is pulse width modulation but doing this on very high energy circuits is very problematic. If you have to first convert it back to AC to transform it, thats lossy and extra work and at that point you’re not going to convert it back to DC again because thats even more lossy and more work and more equipment.

AC transmission suffers significantly less loss due to this effect and the localized heating caused by resistive losses cancels out. If you get the voltage high enough (they run 1 million volts or something like that through the Alps), you get a corona around the wire and you bleed energy into the surrounding ambient which is another source of loss.

The ultimate would be a free energy generator in each persons home, maybe about the size of a toaster thats sufficient to power everything anyone would ever need/want to own. Perhaps nothing thats going to happen near term but eventually, I think it will and I think it’ll be of the scalar interferometer type rather than any kind of fusion.

An interesting discussion which undelines again that abundant “free” energy is not really difficult to come by once the supression is removed.
The easiest to implement in decentralised fashion (meaning everyone gets their own power supply) is probably HYDROGEN ON DEMAND.
That’s the technology Stan Meyer used in his successful watercar in the 80s already (or was it early nineties)
A lot of inventors have since independently rediscovered the basic principle that water can be split into H and O, simply using the principle of resonance. That way the energy input is a lot less than the output received from burning the Hydrogen. LAtest example is an Egyptian inventor who has a working prototype of a resonance based hydrogen generator in his garage.
These things are so obvious now to a growing number of people, that it’s impossible for the cartel to hold the development back much longer.
The good thing about this technology is that we can re-use a lot of existing hardware because all existing INTERNAL COMBUSTION ENGINES can run on hydrogen. I’m sure even jet-engined airplanes can run on hydrogen with some modifications. And apparently you need to carry only a liter of water to get the same reach as a full tank of petrol now.
Of course we will come up with better things once the blockages are removed, but this is a great intermediate technology.
So many mechanics down to the smallest village in Africa can service and fix internal combustion engines.
So it’s good to have the energy revolution happen without having to exchange all the stock of existing cars and other engines. Existing petrol or diesel powered generators can be easily converted to run on hydrogen and we have alot of those operating all over Africa.
Just modify them a bit. The main problem is probably rusting, so newly built hydrogen engines will have ceramic coating on exposed parts.
For the old ones a certain admixture of petrol (maybe 5-10%) will prevent rusting of vital engine parts.
The worldwide relief felt by cuting mineral oil use down to less than 10% of it’s present level would already be humangous.
Of course the Searle magnetic motor and anti-gravity options associated with it is more elegant, but why not take the instant easy option while working on the more exotic concepts.
Georg